Important note for customers outside the EU! Any concerns that your H license plate may by installing a RetroSound car radio at risk would be unfounded. You can get one if you wish Confirmation with the approval of the complete AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) stating that the RetroSound Radio model "Santa Barbara" including vehicle-specific bezel and control knobs installed in classic cars with an H license plate may be or the allocation of the H license plate not impede! The title picture shows other control buttons. Control buttons are supplied as shown in Figures 4 and 5.With freely selectable LCD display lighting! Car radio with DAB+, FM, UKW, USB, bluetooth handsfree, bluetooth Music streaming and AUX-in in vintage design. There are 5 different fronts for the radio module. Front as in the main picture, then write.
Just send us a message. Here are the possible fronts. You can also choose from over 50 different rear and. We all have them in ours. You are also welcome to write to us and we.
Decide together which combination you would prefer. Otherwise we deliver the control knobs as shown.
Playback of MP3 and WMA files via the rear. USB input up to max.Bluetooth hands-free kit with A2DP audio streaming. 1 rear stereo AUX input - Adjustable LCD lighting in 32,000 different colors - Tuner with European odd and even radio frequencies - Integrated 4-channel amplifier 4 x 24 watts RMS / 45 watts max. 2 stereo cinch outputs for external amplifiers (front/rear) - 3 equalizer programs plus individual bass/treble/ Fader/Balance adjustment - XBAS loudness function. Non-volatile memory for device settings. Remote output for automatic antenna and/or amplifier - E-approval e13 03 10006 e1372/2452006/961000600. Technical specifications: - VHF European radio frequency range: 87.5-107.9MHz.
In steps - DAB+ reception via SMB antenna input for passive DAB+ antennas. Dimensions radio base unit 101x51x136mm. Voltage supply 10.5 to 14.4 volts - Maximum current consumption 15 amps - Quiescent current 3.5mA - Speaker impedance 4-8 ohms - Cinch outputs 4-channel / 2.85 volts - AUX input sensitivity >300 mV / 6 kOhm.
Visual dimension of the vehicle-specific Front panel for hole cutout in. Height: 57mm - Width: 104.8mm.Overall dimensions of the radio (excl vehicle-specific front panel): - Total depth (without keys): 137mm - Total height: 38mm - Total width: 90mm - Visible front height: 38mm - Visible front width: 90mm. We also have many vehicle-specific ones Loudspeakers for vintage and youngtimers in special sizes.
You can reach us at the following times: Tuesday - Friday 10 a. Radio model "Santa Barbara" including vehicle-specific bezel and control knobs installed in classic cars with an H license plate Control buttons are supplied as shown in Figures 4 and 5 vehicle model Construction year just send us a message. 2 stereo cinch outputs for external amplifiers (front/rear) - Remote output for automatic antenna and/or amplifier - E-appro. This item is in the category "Automotive\Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Car Stereos & Head Units". The seller is "acr-hof" and is located in this country: DE.
This item can be shipped worldwide.